Heavy Duty Bent Axis Piston Motors

Variable Displacement Motors

• 60, 80, 110, 160 & 250cc/rev.
• Up to 480 bar.
• Two position, pressure compensated & proportional control options.
• Hydraulic, Electric and electro-hydraulic control options.
• SAE, DIN ISO 3019/2 and cartridge flange options.
• Speed sensor option

Brand

51 Series

\

Heavy Duty Axial Piston Pumps & Motors

Variable Displacement Pumps

• 42, 55, 75, 100, 130, 180 & 250cc/rev.
• Up to 480 bar.
• Manual, hydraulic or electrical displacement control options.
• Though-drive capability
• Pressure override, port relieve and by-pass valves.

Fixed & Variable Displacement Motors

• 42, 55, 75, 100 & 130cc/rev.

Brand

90 Series

Medium Duty Axial Piston Pumps & Motors

Variable Displacement Single & Tandem Pumps

• 25, 35, 44 & 46cc/rev.
• Up to 345 bar.
• Direct, manual, hydraulic & electrical displacement control options.

Fixed & Variable Displacement Motors

• 25, 35, 44 & 46cc/rev.
• Speed sensor option.

Brand

40 Series

Medium Duty Axial Piston Pumps

• Variable Displacement Pumps
• 28 & 41cc/rev.
• Up to 345 bar
• Manual, 3 position forward/neutral/reverse, non-feedback proportional, hydraulic and electrical displacement control options.
• Loop flushing and loop by-pass options
• Suction and partial/full flow remote filter filtration.
• Speed sensor and through drive options.

Brand

42 Series

Open Circuit Axial Piston Pumps

• Load Sense and pressure compensated control options.
• 25, 30, 38, 45, 57, 74, 75 & 90cc/rev. and others being developed.
• Up to 310 bar.
• Through-drive options.
• Axial and radial port options.
• Displacement limiter option.
• Spline, straight key and taper shaft options.

Brand

45 Series

Axial Piston Pump & Variable Dis. Motors

Open Circuit Axial Piston Pumps

• Load Sense and pressure compensated control options.
• 15, 23 & 38cc/rev.7 Up to 210 bar.

Variable Displacement Motors

• 25, 30 & 35cc/rev., up to 210 bar
• Axial and twin radial port options.
• Hydraulic single/two line control and speed sensor options.

Brand

L Series

Variable Displacement, 2 Position Motors

• 25, 30 & 35cc/rev.
• Up to 210 bar.
• Radial and end port options
• Speed sensor option

Brand

LV Series

Low Speed High Torque Hydraulic Motors

• OMM
• OMP, OMR, OMH, OMN7 OMS, OMT, OMV
• TMT, and others
• Gerotor and georoller options.
• Speed sensor options
• From 8 to 800cc/rev.
• Standard wheel, short integral brake motor options, and more.

Load Independent Proportional Valves

PVG32 Valve

• Up to 350 bar and 10 sections with end or mid inlet options.
• 230/130lpm inlet/A&B port flows
• Manual, hydraulic, electrical and CAN-bus control options.

PVG120 Valve

• Up to 400 bar and 8 sections.
• 300/240lpm inlet/A&B port flows.

PVG120/32 Combination Valve

Controls - Elect Modules & Remote Levers

Electronic Control Modules

• Ramp, speed, alarm, position, flow regulation and closed loop feedback control modules.

Remote Control Levers

• Proportional or on/off, up to 2 proportional with 6 on/off buttons or 4 proportional with 2 on/off buttons remote control levers.
• Flow regulation and dead band adjustment options
• Up to IP67 rating.

Brand

Accessories

Electro-Hydraulic & Micro Controllers

Electro-hydraulic Controls

• To suit various piston pumps and motors.
• Spring return, friction detent, neutral options.
• Panel and surface mounting options.

Micro-controllers

• Standard units or customised to suit various piston pumps and motors.

Brand

Accessories

Hydrostatic Steering Components

• Hydraulic steering units from 50 to 1000cc/rev.
• Steering unit relief, shock & suction protection valve blocks.
• Steering priority valves.
• Flow amplifiers from 4 to 8 amplification factor, up to 630cc/rev.
• Steering wheel and column options

Planetary Reduction Gears

• Linear from 650 to 500000Nm, ratios up to 1932.47:1.
• Angular from 1050 to 500000Nm, ratios up to 7729.87:1.
• Integral brake option on input side up to 2830Nm.
• Flange and foot mounting options.
• Cylindrical, spline, hollow male and female output shaft options.
• Hydraulic or electrical motor input

Planetary Wheel Gears

• Wheel/tyre and self-laying track types.
• Ratios up to 140.5:1.
• From 900 to 18000Nm.
• Mechanical shoe and negative disc parking brake options.

Negative Type Hydraulic Disc Brakes

• OMP, OMR, OMS, OMT & OMV Sauer-Danfoss motor mounting.
• OMSW, OMTW & OMVW Sauer-Danfoss motor mounting.
• Up to 1300Nm holding capacity.

Multiple Pump Drives

• Up to 4 pumps can be attached to a single drive.
• Up to 4420Nm input torque.
• Dead centre industrial clutch option.
• Decreasing and increasing ratio options.

Genuine Spare Parts

• Sauer-Danfoss
• Sauer-Sundstrand
• Danfoss Fluid Power
• Reggiana Riduttori